#include <Wire.h>  // Only needed for Arduino 1.6.5 and earlier
#include <DS1631.h>
DS1631 Temp1(0);  // ini

 
void setup() {
  Wire.begin(); // start up I2C bus
  delay(500);
  // scan();
   Serial.begin(115200);
   Serial.println("Hi there");
  int config = Temp1.readConfig();
  Temp1.writeConfig(13);  // Set to 12-bit, 1-shot mode
  config = Temp1.readConfig();    
}

void loop() {
  float tist = Temp1.readTempOneShot();
  Serial.print("Temp: ");
  Serial.println(tist);
  delay(1000);
}