#include "SSD1306.h" // alias for `#include "SSD1306Wire.h"               // Board Handling
  // jfs Wemos lolin32
  // jfs Heltec WiFi kit 32 (weisses Board)
  // #define HELTEC
  // Initialize the OLED display using Wire library
  #ifdef HELTEC
  SSD1306  display(0x3c, 4, 15);
  #else
  SSD1306  display(0x3c, 5, 4);
  #endif


#define uS_TO_S_FACTOR 1000000  /* Conversion factor for micro seconds to seconds */
#define TIME_TO_SLEEP  30        /* Time ESP32 will go to sleep (in seconds) */
#define OLED
RTC_DATA_ATTR int bootCount = 0;
#define BUTTON_PIN_BITMASK 0x1000000000000000

void print_wakeup_reason(){
  esp_sleep_wakeup_cause_t wakeup_reason;
  wakeup_reason = esp_sleep_get_wakeup_cause();
  switch(wakeup_reason)
  {
    case ESP_SLEEP_WAKEUP_EXT0 : Serial.println("Wakeup caused by external signal using RTC_IO"); break;
    case ESP_SLEEP_WAKEUP_EXT1 : Serial.println("Wakeup caused by external signal using RTC_CNTL"); break;
    case ESP_SLEEP_WAKEUP_TIMER : Serial.println("Wakeup caused by timer"); break;
    case ESP_SLEEP_WAKEUP_TOUCHPAD : Serial.println("Wakeup caused by touchpad"); break;
    case ESP_SLEEP_WAKEUP_ULP : Serial.println("Wakeup caused by ULP program"); break;
    default : Serial.printf("Wakeup was not caused by deep sleep: %d\n",wakeup_reason); break;
  }
}
String reason = " Don't know !            ";

void get_wakeup_reason(){
  esp_sleep_wakeup_cause_t wakeup_reason;
  wakeup_reason = esp_sleep_get_wakeup_cause();
  switch(wakeup_reason)
  {
    case ESP_SLEEP_WAKEUP_EXT0 : reason = "using RTC_IO"; break;
    case ESP_SLEEP_WAKEUP_EXT1 : reason = "using RTC_CNTL"; break;
    case ESP_SLEEP_WAKEUP_TIMER : reason = "by timer"; break;
    case ESP_SLEEP_WAKEUP_TOUCHPAD : reason = "by touchpad"; break;
    case ESP_SLEEP_WAKEUP_ULP : reason = "by ULP program"; break;
    default : reason = "Dont know"; break;
  }
}

void setup(){
  Serial.begin(115200);
  delay(10); //Take some time to open up the Serial Monitor
  //Increment boot number and print it every reboot
  ++bootCount;
  print_wakeup_reason();
  get_wakeup_reason();
  
 #ifdef OLED
  #ifdef HELTEC
    pinMode(16,OUTPUT); digitalWrite(16, LOW); delay(50); digitalWrite(16, HIGH);
  #endif 
  display.init();
  //display.flipScreenVertically();
  display.clear();
  display.drawString(0,10,String(bootCount));
  display.drawString(0,20,reason);
  display.display();
 #endif
  Serial.println("Boot number: " + String(bootCount));

  
  esp_sleep_enable_ext0_wakeup(GPIO_NUM_15,1); //1 = High, 0 = Low

  esp_sleep_enable_timer_wakeup(TIME_TO_SLEEP * uS_TO_S_FACTOR);
  Serial.println("Setup ESP32 to sleep for every " + String(TIME_TO_SLEEP) +
  " Seconds");
  
  Serial.println("Going to sleep now");
  delay(1000);
  Serial.flush(); 
  esp_deep_sleep_start();
  Serial.println("This will never be printed");
}

void loop(){}